|Place of Origin:||China,Shenzhen|
|Minimum Order Quantity:||10 pcs|
|Packaging Details:||white box like my picture showing|
|Delivery Time:||5-7 working days|
|Payment Terms:||L/C, T/T|
|Supply Ability:||2000 pcs/day|
|Name:||100w Constant Voltage Led Light Power Supply Signal Output 12V Led Power Supply||Color:||Aluminum Silver|
|Output:||12V 8.3A 100W||Input:||100-265V|
led tape light transformer,
led module power supply
Features of power supply:
Protections: Short circuit / Overload / Over voltage
Cooling by free air convection
LED indicator for power on
100% full load burn-in test
High efficiency, long life and high reliability
Specifications of power supply:
|DC voltage ADJ.range||±10%|
|input||Voltage range||90~132VAC/170~264VAC(selected by switch),235~373VDC|
|Inrush current||Cold start current 18A/115VAC,36A/230VAC|
|Leakage current||< 1mA/240VAC|
|protection||overload||Rated output power115%~150% start over load protection|
|protection type:hiccup mode,auto-recovery after fault condition is removed|
|Withstand vibration||10~500HZ,2G 10min/1cycle,period for 60 minutes,each axes|
|safety||Withstand voltage||I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC|
|Isolated resistance||I/P-O/P,I/P-FG,O/P-FG:100M ohms/500VDC|
|Fit standard||Safety standard||Fit UL1012|
|note||1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.|
|2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.|
|3. Tolerance : includes set up tolerance, line regulation and load regulation.|
Power Supply Photo:
How to choose our power supply?
1. Single output
To determine the power after the output voltage is decided. The power range of our switching power supply is 10w to 1500w, output voltage from 3v to 220v DC. If the requirement is 24v, 1a, we can choose s-25-24, and within cost range, retain 10%-20% of the power allowance.
2. Multi -output
The multi-output power supply has the main and secondary circuit output. The character of main circuit output is better than the secondary. To ensure the load regulation, every circuit has to be with a certain load. If just using the second circuit, the main circuit has to be matched with corresponding dummy load.
3. Before placing an order, please kindly confirm us the details below: Input voltage, Output voltage, Output current, Power.
4. When purchasing the power supply, the customer should know the operation environment, for example, temperature, humidity, altitude, etc.
Questions for our power supply?
1. When using your power supply, find the shell with voltage, is that normal?
A: That is normal. It’s specified in the IEC standard that the leakage current is less than 3.5mA. It’s safe and won’t cause any damage to people.
2. Can use 2-50w power supply as the charging power supply?
A: Yes. But in order to avoid battery feedback, please use a series diode on the output, and pay attention to the diode heat dissipation.
3. Why the power supply fails to boot correctly?
A: This is overload protection taking effect. In this case, please choose the appropriate power or contact the manufacture factory.
Address: Gaosheng Mansion A1511, Zhongxin Road No.18, Shajing Town, Bao'an, Shenzhen City, China
Factory Address:4th Floor,Building 8,Xinxintian Industrial Park, Shajing town, Bao'an District, Shenzhen City, China